Edits the color scheme settings for Intensity point cloud stylization.
POINTCLOUDCOLORMAP (Command) Find
The Intensity, Elevation, and Classification stylizations colorize a point cloud based on the relevant point data in the point cloud. You can choose predefined color schemes like "Spectrum" or "Earth," or create your own schemes. You can assign the same color scheme to Intensity and Elevation, or assign a different scheme to each. Classification has a separate set of schemes.
The following options are displayed.
Shows the range of color values that will be applied to the point cloud. You can click a color here to change it.
Lists all color schemes defined in the drawing. Choose a predefined color scheme or create your own.
Specifies the number of colors in the color scheme.
Reverses the order of the colors in the color ramp.
Re-ramps the color ramp based on the first and last colors.
Specifies whether to apply the color range as a gradient or as separate bands of color.
Sets the range to the highest and lowest intensity values in the point cloud.
Sets the maximum intensity value to which the color scheme is mapped.
Sets the minimum intensity value to which the color scheme is mapped.
Sets the display for points with values higher or lower than the specified range.