To Work With Creating Mesh Boxes

Create a Mesh Box Based on a Diagonal and a Height

1. Click Mesh Modeling tabPrimitives panelMesh Box. Find
2. Specify the first corner of the base.
3. Specify the opposite corner of the base.
4. Specify the height.

Create a Mesh Cube

1. Click Mesh Modeling tabPrimitives panelMesh Box. Find
2. Specify the first corner or enter c (Center) and specify the center point of the base.
3. At the Command prompt, enter c (Cube). Specify the length of the cube and a rotation angle.

Create a Mesh Box Based on Length, Width, and Height

1. Click Mesh Modeling tabPrimitives panelMesh Box. Find
2. Specify the first corner of the base.
3. At the Command prompt, enter L (Length). Specify the length of the base.
4. Specify the width of the base.
5. Specify the height.

Create a Mesh Box Based on a Center Point, Corner of Base, and Height

1. Click Mesh Modeling tabPrimitives panelMesh Box. Find
2. At the Command prompt, enter c (Center). Specify the center point of the base.
3. To set the location of the corner of the base, use one of the following methods:
   • To set the length and width simultaneously: Specify the location of one corner of the base.
   • To set the length and width separately: At the Command prompt, enter L (Length) and specify the length. Then specify the width.
   • Specify the height.