On the Project Manager, click the arrow on the Publish/Plot tool , and select Plot Project. Select the drawings to process and click OK.
Selects the layout tab to plot. Change the tab by selecting from the pick list.
Run a pre-plot command script file |
Run an optional script file containing a list of commands to execute BEFORE the plot command is issued. The default script file name is preplot.scr, located in AutoCAD Electrical toolset user subdirectory. |
Run a post-plot command script file |
Run an optional script file containing a list of commands to execute AFTER the plot command is issued. The default script file name is postplot.scr, located in AutoCAD Electrical toolset user subdirectory.
Note: Changes to drawings are not saved during the plotting process. Additionally, the plot time and date stamp text is discarded after the plot is complete. To preserve changes made during the plotting process, add the QSAVE command into the pre- or post-plot script file.
|
A plotter configuration file contains information such as the device driver and model, the output port to which the device is connected, and various device-specific settings. |
|
Use plot config (.pc3) |
Use an existing plotter configuration file (.pc3). |
Use layout tab's default |
Use the default plotter configuration. |
Turns detailed plot configuration options on or off. |
|
Optional page setup name |
Enter an optional page setup name when plot configuration options are turned off. |
Pick list (from current drawing) |
Select an option for the pick list when plot configuration options are turned off.
Note: If using a custom page setup, each drawing must already contain that custom page setup.
|
Enter a subdirectory to plot to or leave blank to plot to the subdirectory where the drawings are located.
OK |
Outputs plots in the selected order |
OK-Reverse |
Outputs plots in the reverse order. |