X Zones Setup Dialog Box

Define or insert the X grid labels for drawings that use X Zones for the Format Referencing.

Find

 Command entry:  AEXZONE

Your drawing must be configured for X Zones. Set the Format Referencing in the Drawing Properties: Drawing Format dialog box to X Zones.

Note:

You can also access this dialog box from the Project Properties or Drawing Properties dialog boxes. Some options are not available when you access the dialog box through the properties dialog boxes.

Origin	Specifies the origin for the X Zone grid. Click pick to select the origin on the drawing or enter X and Y values. Note: The Pick button is not available when accessed through the properties dialog box.
Spacing	Specifies the spacing between the grid columns. Enter the horizontal value.
Zone labels	(only available when accessed from the ribbon, toolbar, or menu) Specifies the labels for the grid columns. Enter the horizontal value. You can enter the first value only or a complete list. If you enter a list, separate the values with commas - such as "A, B, C, D."
Insert zone labels	(only available when accessed from the ribbon, toolbar, or menu) Specifies whether to insert the grid labels. If you select to insert the labels, enter the column counts.