If you want to… | then… |
---|---|
align the pipeline centerline along the points you specify for the pipe run | under Justification, specify Center for Horizontal and Vertical. Specify offset values for each. |
align one side of the pipeline along the points you specify for the pipe run | under Justification, specify from one of nine combinations of Left, Right, Top, or Bottom settings for Justify to align 2 sides along the insertion points. |
offset the pipeline by a uniform distance from the points you specify for the pipe run | enter vertical and horizontal distance offsets. |
You can optionally lock the pipe elevation property. See Pipe Elevation Lock and Locking Pipe Elevation During Drawing.