To Place a Duct MvPart in a Drawing

1. In the HVAC workspace, click Home tabBuild panelEquipment drop-down, and select an equipment from the list.

   The Add MvParts dialog box displays the current part catalog at the folder location associated with the tool you selected.

2. On the Part tab, select a part subtype in the folder.
3. Click Details to view available sizes.
4. Select Display/Hide additional parameters to expand the contents of the parameters table.
5. Click the Part Filter tab, and enter the desired criteria under Filter by Dimensions.
   Tip: The part catalogs and content locations determine the parts that you can add. If the part is unavailable, you can create a custom part using Content Builder.
6. Select a part for Part Size Name.
7. Specify a value for Elevation.
8. If you can assign airflow values to the part, click the Flow tab. For outlet devices, enter the airflow value for Flow. For supply devices, enter an airflow value for each connector.
9. Specify an insertion point in the drawing, and use the compass to specify a rotation angle.
10. Press Enter to end the command.