To Add Parts In-Line to Ducts

1. Select an MvPart to add as explained in To Place a Duct MvPart in a Drawing.
2. To place the part on a duct, move the cursor to a duct segment to display a duct end or duct curve connector.
3. Click the duct connector to place the part in-line to the duct or anchored to a duct end, and use the compass to specify a rotation angle.
4. Press Enter to end the command.

Once the part is inserted, you can use grips to rotate the part around the centerline of the duct segment. You can also flip an in-line part such as a fan to orient the part in the proper flow direction.