AMCOPYRM (Command)

Performs copy, rotate and move operations on specified objects, in sequence.

Find

Summary

Using command line options, you can change the order of operations or suppress copying.

The following prompts are displayed.

Rotates objects without moving them.

Copy objects: Rotates a copy of the objects and keep the originals intact. Enter N to rotate the objects without copying them.
Select objects: Selects the objects to rotate. Press ENTER when you are done.
Base point: Specifies the point to rotate around. The axis of rotation passes through the specified base point and is parallel to the Z axis of the current UCS.
Rotation angle: Specifies how far the selected objects rotate around the base point.

Reference - Rotates objects from a specified angle (reference angle) to a new, absolute angle. You can specify an angle by entering a value or by specifying two points.

Moves, then rotates objects.

Copy objects: Rotates/moves a copy of the objects and keep the originals intact. Enter N to rotate/move the objects without copying them.
Select objects: Selects the objects to move/rotate. Press ENTER when you are done.
Basepoint: Specifies the point to rotate around. The axis of rotation passes through the specified base point and is parallel to the Z axis of the current UCS.
Displacement: Indicates the direction and distance to move the selected objects.
Rotation angle: Specifies how far the selected objects rotate around the base point.

Reference - Rotates objects from a specified angle (reference angle) to a new, absolute angle. You can specify an angle by entering a value or by specifying two points.

Rotates then moves objects.

Copy objects: Rotates/moves a copy of the objects and keep the originals intact. Enter N to rotate/move the objects without copying them.
Select objects: Selects the objects to move/rotate. Press ENTER when you are done.
Base point: Specifies the point to rotate around. The axis of rotation passes through the specified base point and is parallel to the Z axis of the current UCS.
Displacement: Indicates the direction and distance to move the selected objects.
Rotation angle: Specifies how far the selected objects rotate around the base point.

Reference - Rotates objects from a specified angle (reference angle) to a new, absolute angle. You can specify an angle by entering a value or by specifying two points.