AMLGISO (Command)

Hides or locks all layergroups except those of the selected objects.

Find

All layergroups except the layergroups of the selected objects are either turned off, frozen in the current layout viewport, or locked, depending on the current setting. The layergroups that remain visible and unlocked are called isolated.

The following prompts are displayed.

Select Objects on the Layergroups to be Isolated

After selecting one or more objects, all layergroups except the layergroups of the selected objects are either turned off, frozen in the current layout viewport, or locked, depending on the current setting. The layers that remain visible and unlocked are termed isolated.

Note: Locked layergroups are faded by default. You can specify the percent of the fading from the Lock option in this command. You can later change the value with the LAYLOCKFADECTL system variable.

If you make changes to layers within a session and you want to restore the layers to the state they were in immediately before you entered the AMLGISO command, use the AMLGUNISO command.

Settings

Controls whether layergroups are turned off, frozen in the current layout viewports, or locked.

Off

Turns off or freezes all layers except the layergroups of the selected objects.

Vpfreeze

In a layout, freezes all but the selected layergroups in the current layout viewport only. Other layout viewports in the drawing are unchanged.

If not in a layout, all other layergroups are turned off instead.

Off

Turns off all but the selected layergroups in all viewports.

Lock and Fade

Locks all layergroups except the layergroups of the selected objects, and sets the fading for locked layergroups.