Use the Thread dialog box to specify a standard size for a thread. Depending on the installed standard systems you can select a thread type. The thread is provided with an undercut or a normal runout.
Standard Size
Represent standard sizes for the selected thread type.
Drag d
Use the button to determine the diameter by dynamic dragging in the drawing.
Length l=
Enter a value for the length or select the Measure option on the context menu to determine the length by specifying two points in the drawing.
Undercut
Selects thread with undercut.
dg
Optional to enter a value for the general diameter.
r
Optional to enter a value for the radius of undercut.
g1, g2
Optional to enter a value.
Start from
Start thread from right or left.
Standard
Opens the Thread dialog box.