Frequently used component properties
|
Default caption |
Component property |
Description |
Comments |
|---|---|---|---|
|
Item |
ITEM |
Item number assigned to the part or assembly. |
Automatically assigned to the part or assembly by the system. |
|
Qty |
QTY |
Total count of the part or assembly in the BOM. |
Calculated and maintained automatically by the system. |
|
Name |
NAME |
Name of the part or assembly. |
Derived automatically for standard parts, through a formula. Can be overridden. |
|
Description |
DESCR |
A description of the part or assembly. |
|
|
Standard |
STANDARD |
Information related to the standard under which the part or assembly is created. |
|
|
Material |
MATERIAL |
Material used to fabricate the part or assembly. |
|
|
Note |
NOTE |
Notes and comments related to the part or assembly. |
|
|
Vendor |
VENDOR |
Name of supplier of the part or assembly. |
|
|
Description 2 |
DESCR2 |
An additional description for the part or assembly. |
|
|
Standard 2 |
STANDARD2 |
An additional BOM attribute for additional standard related information. |
Not automatically set by the system. |
|
Mass |
MASS |
Per unit mass of the part or assembly. |
|
|
Total Mass |
TOTAL_MASS |
Total mass of the part or assembly in the BOM. |
This property is derived automatically through a formula, which multiplies MASS with QTY. |
|
Price |
PRICE |
Per unit cost of the part or subassembly. |
|
|
Measurement |
DIM |
Measurement of the part or subassembly. For example, The length of a steel shape. |
Derived automatically for steel shapes, through a formula. Can be overridden. |
|
Units |
BOM_UNITS |
Units of measurement of the part or subassembly. |
The system validates content to ensure compatibility with Autodesk Vault Manufacturing. We recommend this option over the UNITS_OF_MEASURE attribute. |
|
Format |
FORMAT |
Part or document sheet format. |
Available only for the GOST standard. |
|
Zone |
ZONE |
Zone in the drawing where the part is located. |
Available only for the GOST standard. |
|
Comments |
COMMENTS |
Notes about a part. |
Available only for the GOST standard. |
Additional component properties
|
Default caption |
Component property |
Description |
Comments |
|---|---|---|---|
|
Assembly number |
ASSY |
Assembly number. |
|
|
Currency |
CURRENCY |
Currency used for PRICE attribute. |
|
|
DWG Manager ID |
DMID |
Drawing Manager Identification number. |
|
|
Filter |
FILTER |
A property used to filter the BOM. |
|
|
ID Number |
USERID |
Identification number of the part or assembly. |
|
|
Manufacturer ID |
MANUFACTURER_ID |
Manufacturer identification number. |
|
|
Manufacturer Part No |
MANUFACTURER_PART_NO |
Manufacturer part number. |
|
|
Parts List Name |
PLNAME |
Parts list name. |
|
|
Parts List Path |
PLPATH |
Parts list path. |
|
|
Unit of Measure |
UNIT_OF_MEASURE |
Same as BOM_UNITS, but system does not validate contents for compatibility with Autodesk Vault Manufacturing. |
|
|
User 1 - User 8 |
USER1 - USER 8 |
System allocated properties to contain user-defined attributes. |
Although it is possible to add user-defined columns, because Autodesk Vault and Autodesk Vault Manufacturing are aware of the existence of these attributes, they are better supported than user-defined attributes. |
|
Vendor ID |
VENDOR_ID |
Vendor Identification number. |
|
|
Vendor Part No |
VENDOR_PART_NO |
Vendor part number. |