About Standard Point Codes for Subassemblies

A set of standard codes define the display and behavior of the point components used in the Autodesk Civil 3D Corridor Modeling subassemblies.

The following illustration shows the location of the standard point codes on subassemblies defining a divided road with a depressed median and truncated shoulders.

Divided Road with Depressed Median; Truncated Shoulders

The table following the illustrations provides descriptions of the point codes used in the illustrated assemblies.

The following illustration shows the location of the standard point codes on subassemblies defining a divided road with a depressed median and extended shoulders:

Divided Road with Depressed Median; Extended Shoulders

The following illustration shows the location of the standard point codes on subassemblies defining an undivided road with a curb-and-gutter. Not all layers are shown.

Undivided Road with Curb-and-Gutter; Not All Layers Shown

The table below names and describes the standard point codes used in the example assembly illustrations.

Point Codes

No.	Code	Description
1	Crown	Crown point between travel lanes on finish grade.
4	Crown_Base	Crown point between travel lanes on the base layer.
5	Crown_Sub	Crown point between travel lanes on the subbase layer.
6	ETW	Edge of traveled way; inside or outside edges of travel lanes on finish grade.
7	ETW_Pave1	Edge of traveled way on the Pave1 layer.
8	ETW_Pave2	Edge of traveled way on the Pave2 layer.
9	ETW_Base	Edge of traveled way on the base layer.
10	ETW_Sub	Edge of traveled way on the subbase layer.
12	Lane_Pave1	Lane break point on Pave1.
13	Lane_Pave2	Lane break point on Pave2.
14	Lane_Base	Lane break point on Base.
15	Lane_Sub	Lane break point on Subbase.
16	EPS	Edge of paved shoulder; outer edge of paved portions of shoulder on finish grade.
17	EPS_Pave1	Edge of paved shoulder on the Pave1 layer.
18	EPS_Pave2	Edge of paved shoulder on the Pave2 layer.
19	EPS_Base	Edge of paved shoulder on the Base layer.
20	EPS_Sub	Edge of paved shoulder; outer edge of paved portions of shoulder on the Subbase layer.
21	EPS_Base_In	Inside edge of paved shoulder on the base layer.
22	EPS_Sub_In	Inside edge of paved shoulder on the subbase layer.
23	ES_Unpaved	Edge of gravel shoulder; outer edge of unpaved portions of shoulder on finish grade.
24	Daylight_Sub	Subgrade intercept point; point where the subbase surface extends and intersects the finish grade.
25	Daylight	Daylight point for a cut or fill slope.
26	Daylight_Fill	Daylight point for a fill slope.
27	Daylight_Cut	Daylight point for a cut slope.
29	Ditch_Out	Outside edge of ditch.
30	Bench_In	Inside edge of bench.
31	Bench_Out	Outside edge of bench.
32	Flowline_Ditch	Flowline of a V-shaped ditch.
33	LMedDitch	Left edge of median ditch.
38	Bottom_Curb	Bottom of curb for a curb without gutter.
39	Back_Curb	Back of curb.
40	Sidewalk_In	Inside edge of sidewalk.

To view all actual code numbers, the code names and brief code descriptions: In Notepad, open C:\ProgramData\Autodesk\C3D <version>\enu\C3DStockSubassemblyScripts.codes.