Lead length — This is the default distance for the automatically calculated lead move of die or punch features. The initial point of the toolpath by this lead length perpendicular from the start point of the curve. You can change the start point of the toolpath on the Start tab of the wire feature.
Connect lead to first curve piece's — This is the position of the default lead on the first curve piece, select either Beginning (default option) or Middle.
Use the center as the start/end point — Select this option to use the center of the circle as the start/end point. Deselect this option to use a different location for the start/end point.
Use lead angle — Select the option and enter the lead angle in degrees. Deselect the option if you do not want to use a lead angle.
Style — There are several choices for the type of moves for leading in and out of an operation. The default Diameter for lead/retract moves is a percentage of the tool diameter.