Surface Reverse

Surface Reverse is an exact operation.

Note: The model must contain an existing surface.

To use Surface Reverse:

1. Select Construct tab > Surfaces panel > From 1 Surface > Reverse to display the Surface Reverse dialog.
2. Select Create new surface(s) to create a new surface or Modify existing surface(s) to modify the selected surface.
3. Optionally enter a name in the Surface name field. This field is available only if Create new surface(s) is selected.
4. Select a surface from the Surface list, or click the Pick surface button and select it in the graphics window.
5. Select whether you want to:
   • Reverse normals.
   • Transpose row/column.
   • Reverse trim loops.
6. Click OK.

Tip: Sheets can also be reversed using Surface reverse. You must select them from the Surface list and not in the graphics window.