The important aspects of roughing are:
-
Getting to depth — The tool must get to depth, and this can be accomplished by a zigzag in Z (the default setting and influenced by Max ramp angle), by plunging, or by pre-drilling.
-
Vertical step — FeatureCAM's cut depth is no more than 100% of the tool radius.
-
Horizontal stepover — FeatureCAM moves over laterally a percentage of the tool diameter (controlled with Rough pass %), as it steps across the feature.
-
Finish allowance — This controls how much material to leave for the finishing pass. By default this is 0.02.
These attributes affect roughing:
For Boss and Pocket features, FeatureCAM provides several different milling methods for roughing.