Real World Measures Settings
- Define button
- Enable to define a target length between two points in the image. Select one point, then press Shift and select the second point. When defining is complete, disable Define. Establishing real world units is helpful when exporting the point cloud through the 3D camera for use in a 3D application.
- Length field
- Displays the measurement of the length between the two points, in the unit of your choice (centimeters, inches, etc.). Editable.
Plane Settings
- Plane Define button
- Enable to define the ground plane in the image (when defining is complete, disable Define).
- Plane Scale field
- Displays the scale of the ground plane. Editable.
- X Position field
- Displays the position of the ground plane on the X axis. Editable.
- Y Position field
- Displays the position of the ground plane on the Y axis. Editable.
- Z Position field
- Displays the position of the ground plane on the Z axis. Editable.
- X Rotation field
- Displays the rotation of the ground plane on the X axis. Editable.
- Y Rotation field
- Displays the rotation of the ground plane on the Y axis. Editable.
- Z Rotation field
- Displays the rotation of the ground plane on the Z axis. Editable.
Filter Settings
- Quality field
- Displays the number of good trackers that are kept, as a percentage. Editable.
- Short field
- Displays the percentage of short duration trackers (trackers that only track a feature for a few frames). Editable.
- Delete button
- Deletes the selected trackers.