Tangent Panels with MasterGrade Curves

New mappings allow you to use the new curves in MasterGrade with your Tangent Panel.

The new MasterGrade curves have been mapped to the Tangent Arc, Element, and Wave panels.

• The mappings are available in MasterGrade.
• The selected curve is shown as a highlight on the panel.
• If you press the RGB Curves RGB, Red, Green, or Blue button, the RGB Curve is selected.

Tangent Arc

Navigation module

• Use the button to move the selected points on the curve:
  • Point < (Decrease X value)
  • Point > (Increase X value)
  • Point + (Increase Y value)
  • Point - (Decrease Y value)
• Bypass Curve (Current / All Curves)
  • Byp Crv = Bypass Current Curve: Top Button bank (bank 3 button 2)
  • Byp Crvs = Bypass All Curves: Top Button bank (ALT bank 3 button 2)
• Reset Curve (Current / All Curves)
  • Reset Crv = Reset Current Curve: Top Button bank(bank 3 button 3)
  • Reset Crvs = Reset All Curves: Top Button bank (ALT bank 3 button 3)

Function module

• Curves |> (Cycle Curve): Press to cycle the curves.
• A label on the right side shows the name of the currently selected curve.
• Home button is now next to Del Point (second button bank).
• Curve Points navigation knobs
  • <|Point|>

    Navigate points on the current Curve

• Reset an individual point or a selection of points on the current Curve:

  Reset Point: Center button bank, second line, rightmost button.

Grading module

• Use the top knobs to select the current curve (press the knob). Rotation knob does nothing.
• • Bank 1
    • RGB
  • Bank 2
    • Hue | Hue (ALT: Hue curve)
    • Hue | Sat
    • Hue | Lum
  • Bank 3
    • Lum | Sat
    • Lum | Lum
    • Sat | Sat (ALT: Sat | Lum)

Curve Points navigation Trackball

• <|Point|>

  Navigate points on the current Curve using the ring of the third Trackball (ALT: Precise mode)

Tangent Element

KB module

• Use the knobs to select the current curve (press the knob). Rotation knob does nothing.

  • RGB

  • Hue | Hue (ALT: Hue curve)

  • Hue | Sat

  • Hue | Lum

  • Lum | Sat

  • Lum | Lum

  • Sat | Sat (ALT: Sat | Lum)

• Previous and Next Point navigation buttons are available.

• Curve Points navigation knobs

  • <|Point|>

    Navigate points on the current Curve

MF module

• Curves |> (Cycle Curve): Press to cycle the curves. A label on the right side shows the name of the currently selected curve.

• Home button is now next to Del Point (second button bank).

• Added missing Del Point in ALT mode.

• Reset Sel (ALT mode: / Reset Al) buttons have been added.

• Use the button to move the currently selected points of the Curve (IM Curves page 1 & IM Sel|Curves page 2

  • Point < (Decrease X value)

  • Point > (Increase X value)

  • Point + (Increase Y value)

  • Point - (Decrease Y value)

• Bypass Curve (Current / All Curves)
  • Byp Crv = Bypass Current Curve: Left button (2nd row)
  • Byp Crvs = Bypass All Curves: (ALT Left button (2nd row)
• Reset Curve (Current / All Curves)
  • Reset Crv = Reset Current Curve: Middle button (2nd row)
  • Reset Crvs = Reset All Curves: ALT Middle button (2nd row)
• Reset an individual point or a selection of points on the current Curve:

  Reset Point (ALT of Del Point)

TK module

• Curve Points navigation Trackball

  • <|Point|>

    Navigate points on the current Curve using the ring of the third Trackball (ALT: Precise mode)

Tangent Wave

Use the knobs to select the current curve (press the knob). Knob does nothing.

• • RGB

  • PositionX

  • PositionY

  • Hue | Hue (ALT: Hue curve)

  • Hue | Sat

  • Hue | Lum

  • Lum | Sat

  • Lum | Lum

  • Sat | Sat (ALT: Sat | Lum)

The buttons allow navigating between points, add, and remove point:

• <| Point (ALT = Add Point)

• Point |< (ALT = Del Point)

Curve Points navigation knobs

• <|Point|>

  Navigate points on the current Curve

Curve Points navigation Trackball

• <|Point|>

  Navigate points on the current Curve using the ring of the third Trackball (ALT: Precise mode)