Sprue Bushing Reference

Creates a custom or vendor sprue bushing.

Access:
	On the Mold Assembly tab, click Sprue Bushing.

Type	Type Specifies the type of sprue bushing in the drop-down list.
Placement - Linear	Reference 1 Specifies the first reference edge of the sprue bushing. Flip Side Reverses the direction of the reference edge. Reference 2 Specifies the second reference edge of the sprue bushing. Flip Side Reverses the direction of the reference edge.
Placement - From Runner Sketch	Point Specifies the location of the sprue bushing. In the graphics window, select the runner sketch geometry, sketch point, or end point as the reference. Ratio Adjusts the position of the sprue bushing along the sketch geometry. Not available if you select a sketch point or end point.
Offset	Defines the offset value of the sprue bushing along the Z axis.
Parameters	Modifies the parameters of the sprue bushing.