Info fields, commands, and parameters appearing in the context view of machine workspaces that export layer stacks as images or simple vector contours without filling (resin photopolymerisation, Progress SCA10)
Note: Not all options are available in all applicable machines.
Jump to:
- Build job, Information
- Filling degree
- Style (per part)
- Material
- Z-Compensation
- Support
- Fields, commands, and parameters without dedicated section
Build job, Information
| Field, command, or parameter | Explanation | Notes |
|---|---|---|
| Parts, Part count | Number of parts present, number of parts selected | |
| Volume | The solid volume of all parts in the buildroom | |
| Build height, Fill height | Highest point until which the buildroom is filled with part volume | |
| Area | Surface area of all parts, including surface of fully enclosed cavities | |
| Keep parts above platform | Enforces a set distance between the lowest point of a part and the build platform | |
| Length, width, height | Dimensions of occupied space along the cardinal axes | |
| Triangles | Triangle count of all parts present inside the buildroom | |
| Keep parts on platform | Automatically snaps parts onto the buildroom surface and disables availability of vertical movement | This can and will destroy packing results that make use of vertical space. |
Filling degree
| Field, command, or parameter | Explanation | Notes |
|---|---|---|
| Buildroom | Fraction of part volume to total (empty) buildroom volume | Counts all parts, even those that are partly or fully outside the buildroom |
| Part height | Fraction of part volume to total (empty) buildroom volume up to the highest point of any part present | Ignores parts partly or fully outside the buildroom |
Style (per part)
| Field, command, or parameter | Explanation | Notes |
|---|---|---|
| Material | Prodways | |
| Material info | ||
| Buildstyle | ||
| Apply style | ||
| Style info |
Material
| Field, command, or parameter | Explanation | Notes |
|---|---|---|
| Build material | Select the material used for the print | Requires import of material data. Consult with the printer provider to obtain material data file. |
Z-Compensation
| Field, command, or parameter | Explanation | Notes |
|---|---|---|
| Apply Z-compensation | Applies mesh deformation to either the selected part or parts or to all parts if none are selected. Cannot be undone with the Undo functionality. |
Sisma
Caution: This immediately replaces the original part with the compensated variant without notification or labeling. Make sure to not accidentally z-compensate multiple times.
|
Support
| Field, command, or parameter | Explanation | Notes |
|---|---|---|
| Run support script | Opens a selection of Stratasys-specific support scripts | |
| Edit support | Shortcut to the support editor |
Fields, commands, and parameters without dedicated section
| Field, command, or parameter | Explanation | Notes |
|---|---|---|
| Load model file, Add parts | Opens an Open file dialog to load a part onto the platform | |
| Orient part | Shortcut to Orient part | |
| Collision detection | Shortcut to Collision detection | |
| Automatic placement, 2D packing | Shortcut to 2D packer | Carbon, others |
| Auto placement | Shortcut to Outbox packer | Sisma |
| Check removability | Shortcut to Check removability command | |
| Edit support | Shortcut to support editor | |
| Remove support | Removes any support attachments | |
| Lattice Assistant | Shortcut to Lattice Assistant | |
| Add perforation | Shortcut to Add perforation command | |
| Export job, Export build data, Create jobfile | Generates slice images and laser paths, as applicable, and exports buildfile | |
| Buildstyle | (See material and machine documentation from envisionTEC) | envisionTEC |
| Split job | envisionTEC | |
| Open in Envision One RP | Sends project to Envision One RP software if installed | envisionTEC |
| Keep parts above platform | Enforces a fixed distance between platform surface and lowest point of a part | |
 Layersize
|
Directly sets the layer thickness the model is sliced at during buildfile generation | Progress |
|
Preview
|
Specifies the variation of the preview model saved to the export file | Progress |