Thermal Analysis
Run the analysis from the command line:
$ pan -b DEDComp_thermal
After the analysis completes, the last few lines of the output file DEDComp thermal.out should be similar to the following:
CPU wall for increment 1114 = 00:00:00.01, since start = 00:03:00.43 inc = 1115 time = 3897.0000 iter = 1 eps = 0.94882E-03 Finished writing file results\ DEDComp_thermal 1115.case Writing record: 99, time: 3897.00000000000 Increment end CPU wall for increment 1115 = 00:00:00.03, since start = 00:03:00.46 Layer end Finished writing file .\ DEDComp_thermal.case Analysis completed **************************** 1 Warning **************************** CPU wall = 00:03:00.52 Approximate single thread simulation time = 01:18:11.43 Peak RAM used for this process = 124,240 kB END Autodesk AM Process Simulation
Figure 1: DED compensation example geometry
Mechanical Analysis
Run the analysis from the command line:
$ pan -b DEDCOMP_mechanical
After the analysis completes, the last few lines of the output file DEDComp mechanical.out should be similar to the following:
CPU wall for increment 1166 = 00:00:00.06, since start = 00:03:26.29 inc = 1167 time = 3897.0000 iter = 1 eps = 0.96928E-11 Finished writing file results\ DEDComp_mechanical 1167.case Increment end CPU wall for increment 1167 = 00:00:00.06, since start = 00:03:26.35 Layer end ---------------------- *COOL time increment ---------------------- HTOR is being set to zero*** inc = 1168 time = 3947.0000 iter = 1 eps = 0.12895E+03 inc = 1168 time = 3947.0000 iter = 2 eps = 0.10316E+03 inc = 1168 time = 3947.0000 iter = 3 eps = 0.10415E-10 Finished writing file results\ DEDComp_mechanical 1168.case Increment end CPU wall for increment 1168 = 00:00:00.21, since start = 00:03:26.57 Layer end ------------------------------------------------------ Total number of equilibrium iterations: 3910 Finished writing file .\ DEDComp_mechanical.case Analysis completed **************************** 1 Warning **************************** CPU wall for cooldown = 00:00:00.28 CPU wall = 00:03:26.63 Total thermal & mechanical simulation time = 00:06:27.16 Approximate single thread simulation time = 01:30:30.25 Peak RAM used for this process = 224,124 kB END Autodesk AM Process Simulation
Figure 2: DED compensation example path
Figure 3: DED compensation example mesh