*STLL
r1: r*8: Maximum homogenized STL line length, default value = 0.8*(2*alpha radius)
Using STL homogenization via *STLH, users may be confronted with a situation where the alpha radius required to incorporate both ends of an STL line segment are greater than the desired alpha radius, so that either gaps that are desired to be remained are filled in, or some source features are homogenized and included in the mesh. *STLL is used to subdivide line lengths exceeding a set threshold. This feature is enabled automatically with default value of r1 set to be 80% of the maximum gap specified by the alpha radius. Use the *STLL card to overwrite the default value.
Required cards: *STLM, *STLF, *STLH