How to Define Panels

1. Select either a plate or shell structure type.

2. Create a contour using one of the options: Polyline, Line, Arc, Circle, or Bar.

3. Select the command Geometry > Panels or press the icon.

4. Define panel parameters in the dialog:

   • Panel number
   • Panel type
   • Panel material and thickness
   • Inner point coordinates.
   Note: Optionally, you can click on the Inner Point field and select the inner point of the panel on the graphic screen.
5. Press the Apply button.

When you begin structure calculations, a planar FE mesh will be created on the defined panel (generation of the structure calculation model).

Note: You can create an opening in the panel using the same method.

See also:

Panels