Modify instance properties to change an individual railing's base level, offsets, and more.
To change instance properties, select the element and change its properties on the Properties palette.
| Name | Description |
|---|---|
| Constraints | |
| Base Level | Specifies the base level for the railing system when it is not hosted on a stair or ramp. If the railing was automatically placed when the stair was created, this value is determined by the stair's base level. |
| Base Offset | For a railing system not hosted on a stair or ramp, this value is the distance from the floor or level to the bottom of the railing system. |
| Offset from Path | Specifies the railing offset from the edge of treads, stringers, or paths on other hosts. When the railing is automatically placed during stair creation, you select to place the railing on the treads or stringers. |
| Dimensions | |
| Length | The actual length of the railing. |
| Identity Data | |
| Comments | Comments on the element. |
| Mark | A mark applied to an element, such as a label that displays in a multi-category tag with the element. For complete information about multi-category tagging and setting up shared parameters, see Shared Parameters. |
| Phasing | |
| Phase Created | The phase when the element was created. See Create a phase. |
| Phase Demolished | The phase when the element was demolished. See About Demolishing Elements. |