Modify instance properties to change the riser preferences and the actual tread depth of a multistory stair, and more.
To change instance properties, select the element and change its properties on the Properties palette.
| Name | Description |
|---|---|
| Constraints | |
| Reference Level | Specifies the level with which the multistory stair is associated. (Ready only) |
| Construction | |
| Begin with Riser | Select to add a riser to the beginning of each run.
Clear to remove the beginning riser and position the adjacent tread at the base elevation. Clearing this option will change the number of risers in each run. You will need to manually add a riser to maintain the original height.
Note: If Begin with Riser is selected, then a notch connection method cannot be used for the run end.
|
| End with Riser | Select to add a riser to the end of each run. Clear to remove the ending riser. Clearing this option will change the number of risers in each run. You will need to manually add or remove risers to maintain the original height.
Note: If End with Riser is selected, then a notch connection method cannot be used for the run end.
|
| Dimensions | |
| Actual Tread Depth | Specifies the value of the tread depth as measured along the stair path. |
| Identity Data | |
| See Stair Component Instance Properties for Identify Data property definitions. | |
| Phasing | |
| See Stair Component Instance Properties for Phasing property definitions. | |