Copy Fixtures for Monitoring

Use the Copy/Monitor tool to copy fixtures from a linked model to an MEP model.

1. Follow the Workflow: Copy/Monitor for Linked Models, linking an architectural model into an MEP model and copying levels, grids, and other elements, as appropriate.
   Note: Before copying fixtures from an architectural model, copy its levels.
2. Open the MEP model.
3. Start the Copy/Monitor tool:
   1. Click Collaborate tabCoordinate panelCopy/Monitor drop-down (Select Link).
   2. Select the linked model in the drawing area.
4. Specify coordination settings for the elements to copy:
   1. Click Copy/Monitor tabTools panel (Coordination Settings).
   2. Under Category, select a fixture category.
   3. Under Behavior, for Copy behavior, select a value.
   4. For Mapping behavior, select a value.
   5. If you defined Mapping behavior as Specify type mapping, specify type mapping for the fixture category, as follows:
      1. In the Category list, under the category name, select Type Mapping.

         The Behavior list displays fixture types (for that category) that occur in the linked model.

      2. For each fixture type, select one of the following values:

         Value	Description
         Copy original type	Fixtures in the current model will use the same type as fixtures in the linked model.
         Don’t copy this type	No fixtures of this type will be copied to the current model. Danger: If you select this value, fixtures of this type will not be copied to the current model now or in the future. See Ignore Fixtures.
         <other>	Select a type from the list. The list reflects family types that are loaded into the current model. When fixtures from the linked model are copied to the current model, they will have the specified type.

      3. (Optional) To see properties of a family type in the linked model or a family type in the host model, select the desired row in the Behavior list, and click Linked Type or Host Type, respectively.
   6. Continue specifying a copy behavior, a mapping behavior, and type mapping for each fixture category.
   7. Click Save & Close.
5. Copy the fixtures individually or in batch mode, as follows.

   To copy fixtures individually

   1. Click Copy/Monitor tabTools panel (Copy).
   2. Select the fixtures to copy.

      To select multiple fixtures, on the Options Bar, select Multiple. Then select the fixtures in the drawing area, and click Finish on the Options Bar.

      You can use a selection box and a filter to select fixtures in the linked model. See Select Elements Using a Filter.

   3. Click Copy/Monitor tabCopy/Monitor panel (Finish).

   To copy fixtures in batch mode

   1. Click Copy/Monitor tabTools panel (Batch Copy).
   2. In the Fixtures Found dialog, click Copy the fixtures.

      The software copies fixtures whose copy behavior is Allow batch copy using the defined type mapping settings, if the fixtures have not already been copied to the MEP model.

When you select a copied fixture in the current model, the monitor icon displays next to the fixture, indicating that it has a relationship with the original fixture in the linked model.

If copied fixtures are moved, changed, or deleted in the linked model, you are notified of the changes when you open the current model or reload the linked model. These warnings also display in a coordination review.