Modify contour cut modifier instance properties to change the boring and boundary dimensions.
To change instance properties, select the element and change its properties on the Properties palette.
| Name | Description |
|---|---|
| Structural | |
| Gap Width | Specifies an additional gap distance beyond the contour cut sketched pattern. |
| Radius | Specifies the radius of the contour cut angles created by the Gap Width parameter. |
| Boring Out | Specifies that the contour cut corners are bored out by the radius dimensions rather than a concave curve. |
| Boundary | Specifies the contour boundaries along the z-axis. Either None, Side 1, Side 2, or Both. |
| Boundary Distance 1 | Specifies the bottom boundary of the contour cut measured from the bottom of the host in the positive direction along the z-axis. |
| Boundary Distance 2 | Specifies the top boundary of the contour cut measured from the top of the host in the negative direction along the z-axis. |