Click the Code Check tab in the Member Properties dialog for an RC member (after calculation of reinforcement theoretical (required) area) to display the following:
The following information, that you cannot change, displays:
- Section name, such as, Section: B20x40
- Material name, such as, CONCRETE
- Type of RC element, such as, RC Beam and RC Column
- Name of calculation parameters, such as, standard
- Calculation status and RC structure design code, such as, PN, and BAEL, information about the calculation status: OK, Out-of-date, or None.
Results are displayed for the following RC member types:
- Columns
- Beams bent with respect to the Y axis
- Beams bent with respect to the Z axis
- Beams bent bi-axially.
The following information is displayed at the bottom of the dialog for individual RC member types:
- For columns:
- Transversal reinforcement
- Area of longitudinal reinforcement A1
- Area of longitudinal reinforcement A2
- Reinforcement ratio
- Remarks
- For beams:
- Transversal reinforcement: in 3 member cross-sections (for a cross-section at the beginning, middle, and end of a member)
- Area of longitudinal reinforcement A1
- Area of longitudinal reinforcement A2
- Average reinforcement ratio
- Cracking width
- Remarks