To Change the Height of Individual Components of a 3D Space

Note: This procedure is valid for associative and non-associative spaces.

1. Select the 3D freeform space for which you want to change individual height components.
2. On the Properties palette, click Basic Component Dimensions.
3. Modify the height components of the space:

   If you want to…	Then…
   specify the ceiling height of the space	enter a height value. The value you enter here is applied uniformly to the space.
   specify a floor thickness	enter a value for Floor thickness.
   specify a ceiling thickness	enter a value for Ceiling thickness.
   specify the distance between the top of the space ceiling to the top of the space	enter the appropriate value for Height above ceiling.
   specify the distance between the bottom of the space floor and the bottom of the space	enter the appropriate value for Height below floor.