Use this procedure to change the horizontal position of a wall modifier applied to a wall, or to change its vertical position on a wall.
A temporary profile is created for you to edit the geometry of the wall modifier. If the wall contains multiple wall modifiers, a profile is created for each wall modifier.
If you want to … | Then … |
---|---|
move the wall modifier horizontally along the wall | select the Move grip, and move the grip to reposition the wall modifier. After you select the grip, you can also enter a value to move the wall modifier a specified distance. |
position the wall modifier relative to the top of the wall | select an isometric view. Select the Offset from top of wall grip, and move the grip to reposition the wall modifier. After you select the grip, you can also enter a value to move the wall modifier a specified distance from the top of the wall. |
position the wall modifier relative to the bottom of the wall | select an isometric view. Select the Offset from bottom of wall grip, and move the grip to reposition the wall modifier. After you select the grip, you can also enter a value to move the wall modifier a specified distance from the bottom of the wall. |
If you want to … | Then … |
---|---|
restore the wall modifier to its original position | click | .
save the changes to the current wall modifier style | click | The wall modifier and the wall modifier style use the edited profile to define its geometry. Any other walls that use this wall modifier style are also updated with the edited geometry.
save the changes to a new wall modifier style | click | . Enter a name for the new wall modifier style, and click OK. The wall modifier uses the new style to define its geometry. Other walls that use the original style are not affected.