To Change the Orientation of an Opening to a Wall

Use this procedure to change the vertical orientation of an opening in a wall to which the openings are anchored.

1. Select the opening you want to change, and click Opening tabAnchor panelSettings.

   Alternatively, you can access anchor settings on the Properties palette.

2. Enter the X and Z rotation angles of the openings.
3. Indicate if you want to reverse the flip direction of the opening in the X, Y or Z axes:

   If you want to…	Then…
   reverse the direction of the opening	select Flip X.
   reverse the top and bottom of the opening	select Flip Z.
   reverse the position of the opening in the side of the wall	select Flip Y.

4. Click OK.