Insert terminals

Use the multiple insert tool to insert and annotate a string of terminals.

Insert terminals

1. If AEGS is not the active project, in the Project Manager, right-click AEGS and select Activate.
2. In the Project Manager, double-click AEGS to expand the drawing list.
3. In the Project Manager, Project Drawing List, double-click AEGS05.dwg.
4. Click Schematic tabInsert Components panelMultiple Insert drop-downMultiple Insert (Icon Menu). Find
5. In the Insert Component: JIC Schematic Symbols dialog box, click Terminals/Connectors.
6. In the JIC: Terminals and Connectors dialog box, click Round with Terminal Number.
7. Respond to the prompts as follows:

   Component Fence, From Point:  Select above wire at line reference 520 (1)

   Component Fence, From Point: to:

    Select below wire at line reference 535 (2), left click to end command, right-click to add terminal

   
8. In the Keep dialog box, select Keep this one.

   Click OK.

9. In the Insert/Edit Terminal Symbol dialog box, Terminal section, specify:

   Location:  MCAB5

   Tag Strip:  TS1

   Number:  1

   
10. Click OK.
11. In the Keep dialog box, select as indicated:
    
12. Click OK.