Surfs to related references of an item you select.
Find
Command entry:
AESURF
When surfing on a table inserted by the Terminal Strip Editor, you can select the title cell to surf on the Tagstrip value even if the Tagstrip is not included in the title. If you select a cell that is not surfable (such as the Tag, Catalog, or Wire Number cell) the Tagstrip value is surfed for the terminal strip.
When surfing for source or destination signals, the Surf dialog box displays the type (Src or Dst), sheet/reference value and description.
|
Show more |
Displays the extra non-Installation/Location matching references when in Combined Installation/Location tag mode. If unselected, only the exact surf matches display in the list. Note: Unavailable if there are not any non-Installation/Location matching references or if you are not in Combined Installation/Location tag mode.
|
|
Freshen |
changes on the active drawing visible to the surfing tool. |
|
Edit |
Edits a reference using the Insert/Edit Component dialog box. |
|
Catalog Check |
Displays a BOM listing of the highlighted reference. Note: The reference must have catalog and manufacturer values.
|
|
Pan |
Moves the view in the active viewport. |
|
Zoom Save |
Saves the current zoom factor on the WD_M block. |
|
Zoom In |
Increases the apparent magnification of the drawing area. The zoom factor is related to the smaller of the active default dimension text size of the drawing (DIMTXT) and text size (TEXTSIZE). The smaller this value is, the closer the zoom is on the reference. |
|
Delete |
Delete the instance that is currently displayed. Note: Child and other related devices are not deleted.
|
|
Pick New List |
Changes the component terminal or signal reference you want to surf. |
|
Zoom Out |
Reduces the apparent magnification of the drawing area. |
|
Go to |
Goes directly to the reference of the highlighted entry. |
Special codes in the surf list box
|
c |
Component symbol |
|
p |
Parent or standalone schematic or one-line symbol Note: A one-line symbol is indicated by a “1-” value in the Category column.
|
|
t |
Terminal |
|
w |
Wire number |
|
# |
Panel layout symbol |
|
# np |
Panel layout nameplate reference |