Use this tab to view the properties of connected profiles. You can change the specified vertical connection profiles and modify the length or K value of parabolas.
Note: To switch a connected profile between dynamic and static states, use the
Profile Data tab. If a connected profile is static, then the Connection Parameters tab is not displayed for that profile.
- Connection
- Displays a numerical identifier for the vertical connection profiles.
- Horizontal Connection
- Displays the horizontal alignments that were specified for the connected alignment.
- Connection Overlap
- Displays the connection overlaps that were specified for the connected alignment.
- Vertical Connection
- Specifies the profile to use for each alignment. If there are multiple profiles in the drawing, you can change this value by clicking in the cell to display a drop-down list.
- Parabola Length/K Value
- Specifies the current length or K value for the parabolas.