Use this tab to add slope patterns between a set of corridor feature lines.
- Add Slope Pattern >>
-
Adds a slope pattern to the corridor. You are prompted to select the feature lines that define the slope pattern.
-
-
Deletes the selected slope pattern.
The properties table contains the following columns:
- Index
-
Displays a numerical identifier for the slope pattern.
- Feature Line1
-
Displays the point code of the first feature line selected to define the slope pattern.
- Feature Line2
-
Displays the point code of the second feature line selected to define the slope pattern.
- Slope Pattern Style
-
Specifies the slope pattern style. Click
and select a style in the Pick Style dialog box or use the standard style creation tools to edit or create a style. - Baseline
-
Displays the feature line’s corresponding baseline.
- Station Start
-
Specifies the start station for the slope pattern display. To edit the station start, enter a value or click
to select a location in the drawing area. - Station End
-
Specifies the end station for the slope pattern display. To edit the station end, enter a value or click
to select a location in the drawing area.