Define Slope Patterns Dialog Box

Use this dialog box to add slope patterns between a set of corridor feature lines.

Add Slope Pattern >>

Adds a slope pattern to the corridor. You are prompted to select the feature lines that define the slope pattern.

Deletes the selected slope pattern.

The properties table contains the following columns:

Index

Displays a numerical identifier for the slope pattern.

Feature Line1

Displays the point code of the first feature line selected to define the slope pattern.

Feature Line2

Displays the point code of the second feature line selected to define the slope pattern.

Slope Pattern Style

Specifies the slope pattern style. Click and select a style in the Pick Style dialog box or use the standard style creation tools to edit or create a style.

Baseline

Displays the feature line’s corresponding baseline.

Station Start

Specifies the start station for the slope pattern display. To edit the station start, enter a value or click to select a location in the drawing area.

Station End

Specifies the end station for the slope pattern display. To edit the station end, enter a value or click to select a location in the drawing area.