You can specify a point location using grid northing and easting values.
Grid settings are required in the drawing, including the zone, the coordinate system, and any applied transformations.
Transformation settings for the drawing may include a base point, a rotation angle, or another reference point.
When you are prompted to enter a point in a command, do one of the following:
Click
Transparent tab
Plan panel
Grid Northing Grid Easting
Find .
Right-click to display the
Transparent Commands context menu
Grid Northing Grid Easting .
Activate the Transparent Commands toolbar and select
Grid Northing Grid Easting
.
Enter
'gn .
Enter a grid northing value.
Enter a grid easting value.
If you are prompted, enter an elevation. For more information, see
To Enter an Elevation for a Transparent Command .
Note: Elevation prompting for transparent commands is controlled by the
Transparent Command setting
Prompt For 3D Points . For more information, see
About Transparent Command Settings .