Use this dialog box to specify the display of the viewports when the Corridor Section Editor opens.
The Corridor Section Editor can display up to three viewports. Each viewport can display either plan, profile, or section.
The viewport configuration is applied when the Apply Viewport Configuration control in the View Edit Corridor Section Options dialog box is set to On.
- Layout
- Lists the available viewport configurations. When you select a layout, a preview is displayed.
- Horizontal Split
- Determines the location of the horizontal dividing line between the top and bottom viewports. The default value is 50%. A value of 40% would cause the top viewport to be 40% of the drawing window height, and the bottom viewport to be 60% of the drawing height.
- Vertical Split
- Determines the location of the vertical dividing line between the left and right viewports. The default value is 50%. A value of 40% would cause the left viewport to be 40% of the drawing window width, and the right viewport to be 60% of the drawing width.
- Viewport 1
- Specifies the contents (either plan, profile, or section) of viewport 1.
Note: One viewport must be set to Section.
- Viewport 2
- Specifies the contents (either plan, profile, or section) of viewport 2.
- Viewport 3
- Specifies the contents (either plan, profile, or section) of viewport 3.