Conforming an EDL

A DLEDL, such as one produced by the Flame when exporting a Sequence as an EDL, does contain the paths to the media. If after having imported a DLEDL some segments are still not linked to their media, use the Conform tab to relink both segments and media.

A regular EDL does not contain the paths to its media. This means that in most cases you will need to perform the following conform operations.

1. Display the EDL to conform in the Conform tab. Do one of the following:
   • If you imported the EDL using the MediaHub: switch to the Conform tab, right-click the EDL and select Open as a Sequence.
     Note: An EDL dragged from the MediaHub and dropped in the Media Panel is automatically opened as a sequence, under the following conditions:

     • It is dropped in the Desktop section of the Media Panel.
     • It is dropped in the Default Library and Protect From Editing is disabled in the Preferences.
   • If you have not already imported the EDL: switch to the Conform tab, right-click the Event list and select Load New FCP XML/AAF/EDL.

     From the window that appears, locate and select the EDL to conform, and then click Load.

2. Add potential sources to the Conform Media folder.

   You now have two lists: the Events list, displaying all the events making up the sequence, and the Conform Media list, displaying the potential sources you selected.

   Note: By default, the Conform Media list displays only the sources matching the currently selected event. Disable Options > Filter Potential Matches to view all the possible sources.
3. With Options > Filter Potential Matches selected, click a event from the event list. The sources matching that event are displayed in the Potential Matches list.
   Note: You can also select a segment directly in the timeline. Both the timeline and the event list update to reflect the current selection.
4. What you do next depends on the Status column of each event.

   Match

   Select Link Sources from the Linking combo box. Link Matched Sources links all events with the Match status to their unique sources. Match indicates that Flame found only one source from the Sources list that fit the selected Match Criteria.

   Multiple Matches

   Do one of the following:

   • Select the event, the source to relink, and then select Link Selected from the Linking combo box.
   • Select the event from the event list, right-click the source to relink, and then select Link.

   If there are too many sources to choose from, set additional criteria using the Match Criteria drop-down menu; by trial and error you can reduce the number of matching sources. The event list displays in yellow any criteria with multiple matches.

   No Match Found

   Either add more sources to the Media folder or modify the criteria selected in the Match Criteria drop-down box. Not Found indicates that either the criteria are too restrictive for Flame to find a match in the available sources, or that the source is simply not there. The event list displays in red any criteria that cannot be matched.

   Unlinked

   Add sources to the Media folder. Unlinked indicates that the event is not linked to any source. It appears only when no sources are available in the Media folder, and the Conform section of the Media panel displays 0 clip total.

   Linked

   Nothing to do: the event is already linked to source. Linked events appear in the Events list only if Options > Hide Linked is not enabled.

5. Once there all the events are linked to sources, you are done with the conform. You can leave the Conform tab.

Important: No matter the selected criteria, a source cannot be linked to an event if it is not long enough to cover the whole event.

Available Options

Limit Handles

To limit the amount of relinked handles and perform the equivalent of a consolidate on link, enable Limit Handles when linking to the sources. When you need to access more than the consolidated media:

1. Right-click the segment.
2. Select Media > Unlink.
3. Disable Limit Handles.
4. Click Link to Media File.

   The full media is now relinked to the segment.

Save Sources

To save a copy of the source in the Sources reel, enable Save Sources. The source saved is what is relinked to the segment, including the Limit Handles setting.

Caching Sources

Flame does not automatically cache the relinked source media. To cache the source media: right-click the target and select Media > Cache Source Media. You can target a segment on the timeline to cache only that segment, or the sequence itself to cache every segment in the sequence.

Filtering Out Tracks

Filter out tracks from the Conform list by locking them on the timeline and selecting Filter Locked Tracks from the Options menu. This removes the segments of the locked track from the Conform Events list, and excludes matching sources from the Media Panel's Conform area.