Type |
- Type
-
Specifies a type of ejector in the drop-down box.
Note: To filter the displayed types, use the Vendor and Category drop-down boxes.
- Eject Plastic Part
-
Places an ejector pin that ejects the plastic part.
- Eject Runner System
-
Place s ejector pin that ejects the runner system.
- Include Center Pin
-
Creates an ejector sleeve with a center pin.
Note: Not all ejector sleeves have a suitable center pin. If there is no suitable center pin to match the ejector sleeve, the Include Center Pin check box is disabled.
|
Placement |
- Plastic Part
-
Specifies a plastic part in the graphics window.
- Place Ejectors
-
Specifies the locations of the ejectors in the graphics window.
- Align Ejectors
-
Specifies the reference edge or plane in the graphics window for the angle value.
|
Parameter Table |
- Value
-
Defines the ejector pin dimensions, using the image as a guide.
|
|
- Anti-rotation
-
Enables the Anti-rotation tab where you can add an anti-rotation feature on an ejector pin.
-
-
Enables Edit Coordinate System and the position edit table. Use Edit Coordinate System to redefine the origin and XY orientation. Use the table to change the position of ejectors or delete ejectors from the list.
|