Delaying the injection start for material B
Enter a short description of your task here (optional).
Make sure you are using a Midplane model, and have selected bi-injection as the molding process.
- Click (Home tab > Molding Process Setup panel > Process Settings).
- Click Next to advance to page 2 of the Process Settings Wizard - 2nd Injection Settings.
- In the Delay timer option, click the down arrow, and select the relevant control from the drop-down menu.
- Enter a value associated with the option you selected, then click Finish.
Important: If you select ram position, but no absolute ram speed profile is specified, an error message with appear and the analysis will stop.