| Parameter | Description | Notes |
|---|---|---|
| Offset |
Determines the margin to generate the contour of the base plate. The margin is added to the shadow area of the part as well as to any contours of solid volume support structures at their termination on the build platform. |
|
| Height |
Determines the thickness of the base plate. |
|
| Fill inner contour |
If the shadow area and the area occupied by solid volume support produces fully enclosed areas, this switch determines whether they should also be covered by the base plate. Note: Enclosed areas are only tested for
before the margin is applied. This switch therefore ignores any areas that (would) become enclosed by overlapping offsets of neighboring shadow or support areas.
|
|
Pattern
|
Instead of being completely solid, the baseplate can be generated with a structured perforation. Choose from Rectangular and Hexagonal. |
|
|
Cell size
|
The distance between parallel walls in a perforation, not counting the walls between perforations |
|
|
Wall thickness
|
Thickness of the wall between adjacent perforations |