| E5075
|
WARNING: E5075
|
BISECTING CURRENT LOAD INCREMENT
|
|
|
Cause:
|
One of the following conditions has occurred:
- The nonlinear solution has diverged (E5078).
- Excessive element internal load(s) were detected (E5079).
- Excessive grid point incremental rotation(s) were detected (E5080).
- No convergence in the maximum number of iterations permitted (E5074) with PARAM,
BISECT set to OFF (default).
|
|
|
Action:
|
None, if the bisect limit has not been reached. The solver will automatically adjust and restart the load increment. See message
E5076 below.
|
|
|
Remarks:
|
See Autodesk Nastran Reference Guide, Section 5,
Parameters, for parameter format.
|