The Selection dialog is used to pick objects from the structure. It is accessed by selecting Edit > Select. It may also be activated for individual objects by clicking the following under the menu: node selection, bar selection, load case selection, and vibration mode. You can also select View > Filter while in the table.
Options are similar for the node, bar, and load case object types. Other appear in the Selection dialog if Modes are selected.
To perform a selection, do the following:
The bottom of the Selection dialog depends on the object selected. Performance of the options available here is described based on node selection.
Nodes may be chosen using the node attributes (object) support, finite element, panel, solid, bar, compatibility, rigid link and emitter. They are selected in the right part of the dialog.
Selecting one of the types and clicking adds all support nodes (regardless of the support kind) to the selected nodes.
A checkbox for determining the definition of selection mode is found to the right of the list of selected nodes. If deselected, the field of node selection will display node numbers corresponding to the nodes where the support is applied.
If selected, the field of node selection will display Support = any.
The difference between the two buttons is as follows.
- Adds selected objects to the selection.
- Replaces the selection with numbers of the selected objects.
Two additional buttons are available.
- Removes selected objects from the existing selection.
- Finds a common part of the existing selection and a selected structure attribute (such as finding members that are assigned the section W 14x120).
The lower part of the dialog contains:
Once Example is selected, the lower part of the dialog will change.
Enter the type of the selected attribute. For example, entering Steel for Material and Bar for Object will select all steel bars defined in the structure when is clicked.
The Selection dialog defines a group of nodes or bars. Once the selection is made, switch to the Group tab.
Once the selection is made and is clicked, the color and the name of the group can be defined. Click Apply to confirm and apply the information.
In the Selection dialog box you can select objects by means of a defined grid of structure axes. The Selection dialog includes an additional Geometry tab.
Here you can determine positions of the beginning and end structure axes (in all directions of the coordinate system), between which objects are to be selected.
Use the buttons in the dialog to:
See also:
Table filtering (data and calculation results)