View and modify the parameters that define the instance properties of fabric reinforcement sheets.
To change instance properties, select the element and change its properties on the Properties palette.
Name | Description |
---|---|
Construction | |
Partition | Specifies the partition in which the fabric sheet is associated. To change a partition, select from the drop-down list or enter a new partition name. See About Rebar Partitioning. |
Fabric Number | Specifies the number of the selected fabric sheet. If assigned to a partition, sheets with identical types, sizes, shapes, and materials will share numbers. See Rebar Numbering. |
Bend Direction | Specifies which edge of the fabric sheet is bent, either Major or Minor. |
Longitudinal Cut Length | Specifies the cut length of the fabric sheet perpendicular to the bent edge. |
Location | Displays the location of the fabric sheet in the host element (either Top or Bottom for floors and foundation slabs; Internal or External for walls). |
Additional Cover Offset | This read-only parameter displays an additional offset to the outside face of the fabric sheet. |
Cut by Host Cover | Select to trim the fabric sheet by the host cover. This includes openings in the host. Deselect to allow a fabric sheet to extend beyond the host cover and edges. |
Rounding Overrides | Specifies the rounding parameters for the selected fabric sheet instance. This overrides the rounding parameters defined in the
Fabric Sheet Type Properties dialog.
Note: This parameter is available only if
reinforcement rounding was specified in the project.
|
Structural | |
Cut Sheet Mass | Calculates and displays the total sheet mass as cut. |
Dimensions | |
Cut Overall Length | This read-only parameter displays the length of fabric wires in the major direction. The first value is the actual cut length; the parenthetical value is the rounded length. |
Cut Overall Width | This read-only field displays the length of fabric wires in the minor direction. The first value is the actual cut length; the parenthetical value is the rounded length. |
Major Lap Splice Length | This read-only parameter displays the distance of the overlap between fabric sheets in the major direction. |
Minor Lap Splice Length | This read-only parameter displays the distance of the overlap between fabric sheets in the minor direction. |
A, B, C, ... | Specifies the length of each segment in the bent fabric sheet.
Note: If you use reinforcement rounding in the project, these dimensions display in a dual format: exact and rounded in brackets. You can edit only exact values. See
Reinforcement Rounding.
|
Identity Data | |
Comments | User comments. |
Mark | A label used, for example, as a shop mark. This value must be unique for each element in a project. Revit warns you if the value is in use, but allows you to continue using it. You can see the warning using the Review Warnings command. See Reviewing Warning Messages. |
Host Category | Specifies the current host associated with the reinforcement elements: Structural Column, Structural Framing, Structural Foundation, Wall, Floor, or Part. |
Host Mark | Specifies the Mark parameter of the rebar host. |
Phasing | |
Phase Created | Indicates the creation phase of the host element. See Project Phasing. |
Phase Demolished | Indicates the demolition phase of the host element. See Project Phasing. |