The Detailed Results dialog contains all available calculation results for the member (steel, timber or aluminum member).
- Access
-
- Click any row in the simplified results dialog.
Dialog elements
- Section properties
- This group contains a graphical representation of the selected section.
- Enter a section name, e.g. IPE 100, and then click Auto to calculate all the code parameters for the section automatically.
-
Note: The code parameters are calculated according to the data displayed at the top of the dialog, such as the bar number, point, and group; and the parameters of the selected section.
Tip: Type the first letters of the section name, and then press enter to display the list of corresponding sections in the drop down box.
- Bar
- Displays the bar number.
- Point / Coordinate
- Displays the group number.
- Load Case
- Displays the load case name, for which verification/design has been performed.
- Results
- The results can be interpreted as follows:
|
Correct section
|
|
Incorrect section
Stresses exceed the allowable strength value.
|
|
Unstable section
The member slenderness exceeds the allowable slenderness value.
|
|
Incorrect and unstable section
The values of allowable stresses and allowable slenderness are exceeded.
|
- Tabs
- The detailed results dialog generally contains two tabs:
-
Simplified Results
-
Detailed Results
- Two additional tabs are available with the Eurocode3 and Polish code PN:
- Displacements: contains the calculation results for the serviceability limit state.
- Battens / Lattice: contains the verification results for elements connecting chords of complex members).
Note: The contents of the dialog, depends on the code according to which bar/group code combinations have been performed.
- Change
- Replaces the original section by the one entered in the Detailed results dialog.
- Lattice
- Opens the Connections of chords dialog and enable the selection and verification of elements connecting individual member chords.
-
Note: This option is available when verifying or calculating complex members for Eurocode3 and Polish code PN only.
- Forces
- Opens the Manual Verification dialog.
- The values of internal forces acting on a selected member are moved here.
- Detailed
- Opens the Detailed Design dialog which allows you to perform a detailed analysis of rolled or welded I-section members.
- Calc. note
- Opens an editable version of the calculation note where you can modify the data and results of the verification/design.