Materials: Supply Fan

In this step, we assign a fan material to blow cooling air through the system.

1. To start, select the fan by left clicking on it:

2. Click Edit from the Materials context panel.

3. On the Materials quick edit dialog, select the material type:

4. From the Name menu, select ComairRotron FlightII 60x25 5000 RPM.

Note: You can expand the dialog by dragging the right-side edge.

5. To set the flow direction at the fan discharge:

6. Verify that the flow direction is 0, 0, 1, and click Apply.

Note: If the direction is 0, 0, -1, open the Flow Direction dialog and click -/+ to change the direction.

What it should look like...

7. To verify that the fan material is properly assigned, check the Design Study Bar and the part coloring:

This is a good time to check the material assignments in the Design Study Bar.

You should save your work now. Click the Save icon from the Quick Access toolbar:

Back | Next