Use this dialog box to specify feature line settings when creating a feature line from a corridor.
- Site
-
Specifies the site in which to place the feature line. Select a site from the list or click
to select a site from the drawing. - Name
-
Specifies the name of the feature line. Select the check box and click
to open the Name Template dialog box. - Style
-
Select the check box and select a feature line style in the list. Click
to edit the style. Click 
to preview the selected style. A style is optional for a feature line, but it provides useful display options and allows you to control color, visibility, and other settings. - Layer
-
Specifies the layer on which the feature line should be created. Click
to open the Object Layer dialog box and specify the layer. Click Use Current Layer to specify that layer be used. - Smoothing
-
Select this check box to enable the curve smoothing settings.
- Horizontal Deviation
-
Specifies the maximum 2D distance within which the non-colinear points must be located from the resulting smooth curve. If set to 0, the curve will interpolate all points.
- Weeding Distance
-
Specifies the minimum distance between co-linear points in the resulting smooth curve. The intermediate co-linear points are weeded.
- Arc Inclusion Distance
-
Specifies the maximum distance within which the non-collinear points must be located to be converted into arcs.
- Create Dynamic Link to the Corridor
-
Creates a dynamic link to the corridor. Then, the feature line updates dynamically with any changes to the corridor. If the feature line is created with the dynamic link, the link can be disabled with the Feature Line Properties dialog box. When the dynamic link is disabled, it cannot be restored. However, when the feature line is not linked to the corridor, it can be edited with any of the feature line editing commands.