The following topics provide information about the Corridor dialog boxes.
Topics in this section
Apply Corridor Template Dialog Box
Use this dialog box to select a corridor template and to specify which corridor properties to apply to another corridor.
Change Assembly Dialog Box
Use this dialog box to select an assembly either from a list or from the drawing area.
Connect Feature Lines Dialog Box
Use this dialog box to change the feature line display styles or to modify how a corridor’s feature lines are connected.
Corridor Style Dialog Box
Use this dialog box to make it easier to locate and work with corridor region boundaries and assembly insertion chainages by changing their display.
Corridor Surfaces Dialog Box
This dialog box lets you create corridor surfaces, and boundaries on corridor surfaces.
Add Baselines Dialogue Box
Use this dialogue box to create or edit multiple baselines for a corridor. Baselines can be comprised of alignments, profiles and feature lines.
Create Corridor Dialog Box
Use this dialog box to specify the parameters for the new corridor, including horizontal and vertical baselines, assembly, and target surface.
Create Rehab Corridor Dialog Box
Use this dialog box to specify the parameters for the new rehab corridor, including horizontal and vertical baselines, region and target surface.
Match Region Parameters Dialog Box
This dialog box lets you select the parameters to match (assembly, targets, frequencies) to selected corridor regions.
Rehab Parameters Palette Reference
This palette lets you assign lane inputs and properties to a rehab corridor, edit the rehab input parameters in the properties table and apply your modifications to the selected rehab corridor region .
Section Editor Ribbon Tab
Use this ribbon to view and modify cross-sections at chainages along a corridor.
Select a Feature Line Dialog Box
Use this dialog box to select a feature line when you have made an ambiguous selection in the drawing.
Select a Horizontal Baseline Dialog Box
Use this dialog box to select a horizontal baseline for a corridor. The baseline can be comprised of an alignment and profile or a feature line.
Select a Profile Dialog Box
Use this dialog box to select a profile either from a list or from the drawing area.
Select a Subassembly to Insert
Use this dialog box to select a detached subassembly to insert when you are using the Edit/View Corridor Section Tools to override corridor and assembly parameter sections.
Select a Vertical Baseline Dialog Box
When you are defining a baseline for an offset assembly, you can specify one alignment/profile or feature line for its horizontal geometry, and a second alignment/profile or feature line for its vertical geometry. Use this dialog box to define the vertical geometry for an offset assembly.