Corner Radius Parameters Tab (Alignment Properties Dialog Box)

For a corner radius alignment, use this tab to review and edit design data.

Parent Alignment 1

Name

Specifies the alignment that forms the basis of the design at the start of the corner radius alignment.

Corner Radius End Point Chainage

Specifies the chainage value on the parent alignment where the corner radius alignment starts.

Corner Radius Offset Value

Specifies the offset of the corner radius start point from its parent alignment. This field is editable.

Parent Alignment 2

Name

Specifies the alignment that forms the basis of the design at the end of the corner radius alignment.

Corner Radius End Point Chainage

Specifies the chainage value on the parent alignment where the corner radius alignment ends.

Corner Radius Offset Value

Specifies the offset of the corner radius start point from its parent alignment. This field is editable.

Update Mode

Specifies whether the corner radius alignment reacts to edits of the parent alignment or offset. This field is editable.

• Dynamic. The corner radius alignment is updated in response to edits of other junction objects.
• Static. The corner radius alignment is at a fixed location, and does not respond to edits of other junction objects.

Lock Mode

Specifies that the corner radius is always geometry locked. The start and end of the corner radius offset are located in relation to the nearest geometry points on the parent alignment.