Alignment Properties Dialog Box

Use this dialog box to review or edit many alignment details such as the name, design speeds, and label sets.

Some of the tabs on this dialog box are conditional, subject to alignment type. For example, the Corner Radius Parameters tab appears only for Corner Radius alignments.

Topics in this section

Information Tab (Alignment Properties Dialog Box)
Use this tab to change the alignment name, description and alignment style information, and to review details, such as when the style was most recently modified.
Chainage Control Tab (Alignment Properties Dialog Box)
Use this tab to establish the Chainage Reference Point and assign chainage equations along the alignment.
Masking Tab (Alignment Properties Dialog Box)
Use this tab to suppress the display of an alignment and its labels for a range of chainages.
Intersection Point Tab (Alignment Properties Dialog Box)
Use this tab to specify the display of implied intersection points, where the IP is not defined by two fixed straights.
Constraint Editing Tab (Alignment Properties Dialog Box)
Use this tab to affect the behavior of the Tangency Constraint (Not Constrained, Constrained by Preceding, Constrained by Following, and Constrained on Both Sides) and Parameter Constraint (Radius, Length, Pass Through Point, etc.) while the alignment is edited.
Design Criteria Tab (Alignment Properties Dialog Box)
Use this tab to establish the design criteria, including speeds along the length of the alignment.
Profiles Tab (Alignment Properties Dialog Box)
Use this tab to view data about a profile associated with the alignment.
Profile Views Tab (Alignment Properties Dialog Box)
Use this tab to view data about a profile view.
Offset Parameters Tab (Alignment Properties Dialog Box)
For a dependent offset alignment, use this tab to set properties of the offset.
Corner Radius Parameters Tab (Alignment Properties Dialog Box)
For a corner radius alignment, use this tab to review and edit design data.
Rail Parameters Tab (Alignment Properties Dialog Box)
Use this tab to specify parameters that are specific to Rail alignments.
Connection Parameters Tab (Alignment Properties Dialog Box)
Use this dialog box to view the properties of connected alignments and to modify the curve radius or change the update status between dynamic and static.

Parent topic: Alignment Dialog Boxes